Switch to the mobile page CHINESE ENGLISH JAPANESE

 

 
Home >> Surge protector
BACK Surge protector
Image File NameProduct Description
SPD for wind turbines type SPD for wind turbines type 
PSD Brochure Surge protector for supply system, photovoltaic, network, telecommunication, high energy Multi-Air-Gap and spark gap series for Class I, II, III application.  
Lightning Event Count ECL-A-9 Lightning Event Count ECL-A-9 
TvssPro® E-series
Type 1, Type 2 Surge Protective Device 		Type 1, Type 2 Surge Protective Device, voltage from 120 to 600V, max. discharge current 50 to 1200KA, confirm to UL1449, certified by CSA C22.2#8 Weather proof NEMA4X, IP64 
SURGE ARRESTERS FOR LED STREET LIGHT RL-3MVGT/390-10/S LED路燈用SPD  SURGE ARRESTERS FOR LED STREET LIGHT RL-3MVGT/390-10/S LED路燈用SPD  
JDA RL(3MV+G)-320-10S，LED路燈用突波保護器  JDA RL(3MV+G)-320-10S，LED路燈用突波保護器  
RJ45 CAT6 SURGE PROTECTOR EN-05RJ45HSCAT6 RJ45 CAT6 SURGE PROTECTOR EN-05RJ45HSCAT6 
CL12T-VL05BNC-PL220T/3F Integrated protection for power lines, control lines and video signal lines of the camera 
8*MV50/320 8*MV50/320 
MV80P-320-R MV80P-320-R 
PVB12.5/1500-MVCDR  Surge protector PVB12.5/1500-MVCDR  
PV20/24-MV-R Class II (C) DC arrester in according with IEC61643-1:2005.
Two part design consisting of base and plug-in protection module.
Common protection mode.
High energy MOV (Metal Oxide Varistor) inside.
Reliable supervision due to disconnection device.
Fault indication by red indication flag in window.
Fast response.
With remote alarm terminal.
 
PV20-xx-MVCR Type 2 surge arrester designed for low voltage DC system against surges at the boundaries from lightning protection zone 0B-2and higher. ◎ In accordance with IEC61643-11 and UL1449-4th ◎ DC SPD for common mode protection ◎ Pluggable module design, easy replacement ◎ High discharge current 20kA 8/20 ◎ Reliable supervision due to disconnection device; ◎ Fault indication by red indication flag in window; ◎ With remote alarm terminal optional; 
PV20/48-MVCR Class II (C) DC arrester in according with IEC61643-1:2005.Two part design consisting of base and plug-in protection module. Differential and common protection mode.High energy MOV (Metal Oxide Varistor) inside.Reliable supervision due to disconnection device.Fault indication by red indication flag in window.Fast response.With remote alarm terminal. 
PV40/125-2V-R Surge protection for Common mode DC Surge arrester for DC system, max.discharge current 40KA, 170Vdc with aux. relay output. 
PV40/(48-100)-MVCR PV40/(48-100)-MVCR
In accordance with EN50539, IEC61643-11 and UL1449-4th
DC SPD for common mode protection
Pluggable module design, easy replacement
High discharge current 40kA 8/20
Reliable supervision due to disconnection device
Fault indication by red indication flag in window
With remote alarm terminal optional
 
PV40/100-MVCR Class II (C) DC arrester in according with IEC61643-1:2005.
Two part design consisting of base and plug-in protection module.
Common protection mode.
High energy MOV (Metal Oxide Varistor) inside.
Reliable supervision due to disconnection device.
Fault indication by red indication flag in window.
Fast response.
With remote alarm terminal.
 
PV40/150-MVCR Type 2 surge arrester designed for low voltage DC system against surges at the boundaries from lightning protection zone 0B-2and higher. 
PV40/500-MVCR Surge protector PV40/500-MVCR 
PV40/600-MVCR Wiring-Lower side Surge protector PV40/600-MVCR Wiring-Lower side 
PV40/600-MVCR  For solar PV generation system, max.discharge current 40KA, 600Vdc with aux. relay output.  
PV40/1000-MVC (White Enclosure) PV40/1000-MVC (White Enclosure) 
PV40/1000-MVCR (White Enclosure) PV40/1000-MVCR (White Enclosure) 
PV40/1000-MVCR (Black Enclosure) PV40/1000-MVCR (Black Enclosure) 
PV40/1000-MVCR (red/black enclosure) PV40/1000-MVCR (red/black enclosure) 
PV50-600-MVCR Class II (C) DC arrester in according with IEC61643-11 and UL1449-3rd.
Two part design consisting of base and plug-in protection module.
Common protection mode.
High energy MOV (Metal Oxide Varistor) inside.
Reliable supervision due to disconnection device.
Fault indication by red indication flag in window.
Fast response.
With remote alarm terminal optional.
 
PV60/1500-MVCDR Surge protector PV60/1500-MVCDR 
PV60/600-MVCR  •Class II (C) DC arrester in according with IEC61643-1:2005.•Two part design consisting of base and plug-in protection module. •Common protection mode.•High energy MOV (Metal Oxide Varistor) inside.•Reliable supervision due to disconnection device.•Fault indication by red indication flag in window.•Fast response.•With remote alarm terminal optional. 
PV15/1200-MVCDR  Class II (C) DC arrester in accordance with IEC61643-11
Two part design consisting of base and plug-in protection module.
Differential and common protection mode.
High energy MOV (Metal Oxide Varistor) inside.
Reliable supervision due to disconnection device.
Fault indication by red indication flag in window.
Fast response.
With remote alarm terminal.
 
PV25/600-MVCDR Class II (C) arrester in accordance with IEC61643-11:2011, UL1449 3rd.Two part design consisting of base and plug-in protection module. High energy MOV (Metal Oxide Varistor) inside.Reliable supervision due to disconnection device.Fault indication by red indication flag in window.Fast response.With remote alarm terminal optional. 
PVxx/1500-MVCDR 8/20us, In/Imax. 30/60KA Max. continuous operating voltage (Vdc):1500/1520 Operating temperature range:-40~+80℃  
PV40/1500-MVCDR For solar PV generation system, max.discharge current 40KA, 1500Vdc with aux. relay output. 
PV40-1000-MVCD-R Surge protector PV40-1000-MVCD-R 
PV50/1000-MVCDR PV50/1000-MVCDR 
PV50/1000-MVCDR-Wiring on the side Surge protector for solar PV generation system, max.discharge current 40KA, 1000Vdc with aux. relay output.  
PV50/1200-MVCDR DIN rail mountable and ease of installation
Innovative thermally protected MOV technology (Patent)
Quick thermal response self-protected design with internal arc extinguishing
Visual indicator
Maximum discharge current of 50 kA
Short circuit current rating (SCCR) 200KA without external Fuse or CB
Meet all requirements of UL 1449 3rd Edition
Remote indicator
In of 20kA
 
PV50/(600-1200)-MVCDR PV50/(600-1200)-MVCDR 
PV80/1000-MVCDR Surge protector PV80/1000-MVCDR 
PV100/1000-MVCDR Surge protector PV100/1000-MVCDR 
PV100/1000-MVGTCDR Surge protector PV100/1000-MVGTCDR 
D1-F10-175-5A-3P-C(-S). Surge arrester for low-voltage power supply system protection against surges at the boundaries from lightning protection zone 2-3 and higher 
 D1-20-180-S Class III (D) arrester in according with IEC61643-11:2011.
 
D1-20/275-2MV-R Class II (C) arrester in according with IEC61643-11.
Two part design consisting of base and plug-in module.
High energy MOV (Metal Oxide Varistor) inside.
Reliable supervision due to disconnection device.
Fault indication by red indication flag in window.
Fast response.
With remote alarm terminal.
 
D1-20/275-VG-R Class II (C) arrester in according with IEC61643-11.
Two part design consisting of base and plug-in module.
High energy MOV (Metal Oxide Varistor) for L-N and GDT for N-PE.
Reliable supervision due to disconnection device.
Fault indication by red indication flag in window.
Fast response.
With remote alarm terminal.
 
D1-40/***-2MV-R D1-40/***-2MV-R 
D1-40/275-2MV-R Class II (C) arrester in according with IEC61643-11.
Two part design consisting of base and plug-in module.
High energy MOV (Metal Oxide Varistor) inside.
Reliable supervision due to disconnection device.
Fault indication by red indication flag in window.
Fast response.
With remote alarm terminal.
 
D1-50/150-VG-R Class I+II (B+C) arrester in accordance with IEC61643-11:2011, UL1449 3rd.
Two part design consisting of base and plug-in protection module.
High energy MOV (Metal Oxide Varistor) and Gas Discharge Tube (GDT) inside.
Reliable supervision due to disconnection device.
Fault indication by red indication flag in window.
Fast response.
With remote alarm terminal optional. 
D1-50/275-2MV-R Class II (C) arrester in according with IEC61643-11.
Two part design consisting of base and plug-in module.
High energy MOV (Metal Oxide Varistor) inside.
Reliable supervision due to disconnection device.
Fault indication by red indication flag in window.
Fast response.
With remote alarm terminal.
 
D1-100/***-2VG-R D1-100/***-2VG-R 
D1-200/320-2MV-R Class I+II (B+C) arrester in according with IEC61643-1:2005.
Two part design consisting of base and non-pluggable protection module.
High energy MOV (Metal Oxide Varistor) inside.
Reliable supervision due to disconnection device.
Fault indication by red indication flag in window.
Fast response.
With remote alarm terminal optional.
 
D3-30/380-4MV-R Class II (C) arrester in accordance with IEC61643-11:2011, UL1449 3rd.
Two part design consisting of base and plug-in protection module.
High energy MOV (Metal Oxide Varistor) inside.
Reliable supervision due to disconnection device.
Fault indication by red indication flag in window.
Fast response.
With remote alarm terminal optional.
 
D3-30/440-3VG-R Class II (C) arrester in accordance with IEC61643-11:2011, UL1449 3rd.
Two part design consisting of base and protection module including plug-in module and non-pluggable module
High energy MOV (Metal Oxide Varistor) and GDT (Gas Discharge Tube) inside.
Reliable supervision due to disconnection device.
Fault indication by red indication flag in window.
Fast response.
With remote alarm terminal optional.
 
D3-40/440-3MV-R Data network protector in according with IEC61643:21-2005.
Standard design for double-wire systems / RS485
Limit the transients with gas discharge tubes and transzorb diodes.
Two-stage protection circuit.
In aluminium housing.
Terminal block connector for use in measuring, control and regulation systems.
Simple installati 
D3-40/***-4MV-R D3-40/***-4MV-R 
JDA電力突波吸收器 D3-40/440-4MV-R   突波保護器(或稱突波吸收器)應用於太陽能光伏發電系統，最大放電電流30KA 440Vdc，附輔助電驛輸出。 
D3-50(150550)3MV-R AC Surge protector, D3-50/275-3MV-R, type 1, SCCR) 200kA ,　UL1449-4th 
D3-50-(150-550)-3VG-R Class I+II (B+C) arrester in accordance with UL1449-4th,
Max. continuous operating voltage MCOV L-N (VAC/DC) 550/710, Enclosure material,extinguishing degree UL94 V-0, Operating temperature range, - 40ºC ~ + 80ºC, 
D3-50-(150-550)-4MV-R Surge protector, D3-50-550-4MV-R, 
D3-50/320-3VG-R Class I+II (B+C) arrester in accordance with IEC61643-11:2011, UL1449 3rd.
Two part design consisting of base and plug-in protection module.
High energy MOV (Metal Oxide Varistor) and Gas Discharge Tube (GDT) inside.
Reliable supervision due to disconnection device.
Fault indication by red indication flag in window.
Fast response.
With remote alarm terminal optional.
 
D3-50/320-3MV-R Class I+II (B+C) arrester in accordance with IEC61643-11:2011.
Two part design consisting of base and plug-in protection module.
High energy MOV (Metal Oxide Varistor) inside.
Reliable supervision due to disconnection device.
 
D3-50-420-4MV-R Surge protector D3-50-420-4MV-R 
D3-50-550-4MV-R Surge protector D3-50-550-4MV-R 
D3-60/440-4MV-R D3-60/440-4MV-R 
D3-65/440-3VG-R Class II (C) arrester in according with IEC61643-11.
Two part design consisting of base and plug-in protection module.
High energy MOV (Metal Oxide Varistor) and GDT (Gas Discharge Tube) inside.
Reliable supervision due to disconnection device.
 
D3-80-385-4MV-R 
8/20us, In/Imax. 40/80KA

Max. continuous operating voltage (AC/DC):385/505

Operating temperature range:-40~+80℃
 
D3-80/440-3VG-R Class II (C) arrester in accordance with IEC61643-11:2011 and UL1449-3rd.
Two part design consisting of base and non-pluggable protection module.
High energy MOV (Metal Oxide Varistor) and GDT (Gas Discharge Tube) inside.
Reliable supervision due to disconnection device.
 
D3-100/320-4MV-R Class II (C) arrester in accordance with EN50539-11, IEC61643-11:2011 and UL1449-3rd.
Imax 100KA 8/20 per pole, total Imax 400KA 8/20.
Reliable supervision due to disconnection device.
Fault indication by red indication flag in window.
Fast response.
With remote alarm terminal.
 
D3-100/385-4MVGT-R D3-100/385-4MVGT-R 
D3-150/385-3VG-R Class II (C) arrester in accordance with IEC61643-11:2011, UL1449 3rd.
Two part design consisting of base and non-pluggable protection module.
High energy MOV (Metal Oxide Varistor) and GDT (Gas Discharge Tube) inside.
Reliable supervision due to disconnection device.
Fault indication by red indication flag in window.
Fast response.
With remote alarm terminal
 
D3-150/385-3VG-R Class II (C) arrester in accordance with IEC61643-11:2011, UL1449 3rd.
Two part design consisting of base and non-pluggable protection module.
High energy MOV (Metal Oxide Varistor) and GDT (Gas Discharge Tube) inside.
Reliable supervision due to disconnection device.
Fault indication by red indication flag in window.
Fast response.
With remote alarm terminal
 
D3-160/420-4MV-R D3-160/420-4MV-R 
E100-7M-420-x-A E100-7M-420-x-A, UL certified, suitable for TT/TN system protection, up to 100KA 8/20 
DN-&&/xxxxx/G Data network protector in according with IEC61643-21.
Two parts design, surge protection modules to be exchanged easily.
Limit the transients with gas discharge tubes and diodes.
Two-stage protection circuit.
35 mm DIN-rail mounting design.
 
DN-05/RS485-3G DN-05/RS485-3G 
DN-24-RS485-BG RS485 ModBus surge protector 
DN-24-G Data network protector in according with IEC61643:21.Pluggable type, easy replacing.Limit the transients with gas discharge tubes and transzorb diodes.  
DN-24/G(25KA) Data network protector in according with IEC61643:21.
Pluggable type, easy replacing
Limit the transients with gas discharge tubes and transzorb diodes.
 
DN-24/0420-2G JDA-訊號突波保護器 Data network protector in according with IEC61643-21. Two parts design, surge protection modules to be exchanged easily. Limit the transients with gas discharge tubes and diodes. Two-stage protection circuit. 35 mm DIN-rail mounting design.  
DN-24/BNC-50 DN-24/BNC-XX surge arrester is designed for coaxial systems protection against the damaging from surges and spikes caused by lightning and other electrical sources, suitable for use in category location B, C (ANSI/IEEE C62.41) or directly at the upstream near the protected devices. Technical Features ◎Data network protector in according with UL497b,IEC61643-21:2012; ◎High discharge capability, total nominal discharge current up to 20kA 8/20; ◎Two-stage protection circuit; ◎Limit the transient with gas discharge tubes and transzorb diodes; ◎Low insertion loss; 
DN-24/BNC-75 JDA DN-24/BNC-75 surge arrester is designed for coaxial systems protection against the damaging from surges and spikes caused by lightning and other electrical sources, suitable for use in category location B, C (ANSI/IEEE C62.41) or directly at the upstream near the protected devices. Technical Features ◎ Data network protector in according with UL497b,IEC61643-21:2012; ◎ High discharge capability, total nominal discharge current up to 20kA 8/20; ◎ Two-stage protection circuit; ◎ Limit the transient with gas discharge tubes and transzorb diodes; ◎ Low insertion loss; 
DN-48/RJ45-CAT6/HS(POE) This Cat6-PoE Protector is designed for protecting Gigabit Ethernet terminals such as Internet camera, IP Telephone sets, and wireless access point, suitable for use in category location B, C (ANSI/IEEE C62.41) or directly at the upstream near the protected devices. Technical Features ◎ Data network protector In according with standard IEEE802.3at/af,UL497b,IEC61643-21 ◎ PoE compatible, Ethernet CAT6 system protection ◎ High discharge capability, total nominal discharge current 10kA 8/20 and Lightning current up to 1.0KA ◎ In aluminum housing ◎ RJ45 connector for cat6 network technology, 100BaseT, 1000BaseT/1000BaseTx, 8 wires protection 
DN-xxx-MB/G2 DN-xxx-MB/G2 JDA DN-xxx-MB/G2 data network arrester applied in protection for 2 single wires of balanced interfaces with measuring and controlling system, providing coarse and fine protection, suitable for use in category location B, C (ANSI/IEEE C62.41) or directly at the upstream near the protected devices. Technical Features ◎ Data network protector in according with UL497b,IEC61643-21:2012; ◎ Compact size of 6.2mm to safe much installation space ◎ 35mm Din-rail mounting design; ◎ Limit the transients with gas discharge tubes and transzorb diodes; ◎ Three-stage protection circuit. ◎ Universal one pair data/communication lines protection 
DN-xxx-MB/G4 JDA DN-xxx-MB/G4 MODBUS RS485 Data network arrester provide protection for four single lines or two-pair lines in the high-frequency bus systems or video transmissions, suitable for use in category location B, C (ANSI/IEEE C62.41) or directly at the upstream near the protected devices. Technical Features ◎ Data network protector in according with UL497b, IEC61643-:21:2012; ◎ Compact size of 7 mm to safe much installation space ◎ 35mm Din-rail mounting design; ◎ Limit the transients with gas discharge tubes and transzorb diodes; ◎ Two-stage protection circuit. ◎ 4-lines or twp-pair lines protection 
DRF25-175-25A-3MV-C(-R) Surge protective device especially for low-voltage power supply system surge protection at the boundaries from lightning protection zone 2-3 and higher. ◎ Multi-stage protection circuit with LC Filter design to protect sensitive electronics. ◎ Provides extensive high frequency & RF filtering ◎ Application for 120~127Vac,220~277Vac(L-N) TT, TN or any 1-phase system with a grounded neutral ◎ Protection capability 25kA 8/20 us ◎ Built in backup fuse for fault current protection ◎ All mode protection ◎ LED failure indication ◎ Remote alarm function available 
MVGT100/***-R MVGT100/***-R 
JDA 2*MVGT100/420-R Double phase power supply system, Class I +II(B+C) DC arrester in according with IEC61643-1:2001, Tested with lightning impulse current (10/350) in according with IEC61643- 1:2005, High energy MOV (Metal Oxide Varistor) & GDT (Gas Discharge Tube) in series inside, Reliable supervision due to disconnection device, No leakage current and No follow current, With remote alarm terminal optional. 
ECL-A-24 Lightning event counter is used for testing the lightning event in a certain area. 
ESF50-1/xxx- 32A-3P Type :ESF&&-x/***-##A-$$,Enclosure type Surge power Filter,Max. surge current (Available from 25KA ~200KA),power system (Single phase/three phase),Input voltage – Uc(180/320/420/550),Current rating - continuous (5A/10A/16A/20A/32A/50A/63A/100A/ 120A… ),3P/PN/3PN: protection mode(L-N,L-PE,N-PE 3MOV/L-N,N-PE 1MOV+1GDT/L-N,N-PE 3MOV+1GDT),{Applications:Secondauy power circuits/Sub-boards,Computer Systems / Medical Systems,Telecommunication Systems / Recti_ers,All sensitive Electronic Equipment,Process and Control Systems}  
EN-6/RJ45HS-8 EN-6/RJ45HS-8  
MTMV-xxx  
RL2MV+G-320-10P/S The JDA-RL (2MV+G)/xxx-10/x-L is comply to IEC61643-11 and UL 1449 3rd surge protection device (SPD) designed to protect single phase LED lighting applications. Offering full mode protection, LED status indication and with remote alarm contact. 
SDT-110-20-F1  
SSP-24  
Surge Protector (Square) Surge Protector (Square) 
Surge Protector (Round) Surge Protector (Round) 
Surge Protector (Round Pin) Surge Protector (Round Pin) 
日煬科技通過TUV ISO 9001: 2008認證
ISO 9001:2008
Management System
www.tuv.com
ID 9105078757
About Us　|　 News 　|　 Links　|　 Contact　|　 Supply us　|　 Home
TEL：+886-2-8991-2796　FAX：+886-2-8991-9298 Copyright protected

alloyanontoxicnatural